HomeCompanyProductsCareers
 


200L A FLAT TOP



Dimensions Measurements
Tolerances
Total Height 900/930/970 mm
+ 10 mm / - 10 mm
Outer Diameter 580 mm
+ 10 mm / - 10 mm
Diameter of Bung House 81 mm
 
Diameter of Seal Cap 85 mm
+ 0.5 mm / - 0.5 mm
Height of Seal Cap 8.8 mm
+ 0.2 mm / - 0.2 mm
Diameter of Bung 70.4 mm
+ 0.3 mm / - 0.3 mm
Height of Bung 27.5 mm
+ 0.3 mm / - 0.3 mm
Dimensions of Material
Wall thickness- body area minimum 3.2 mm
 
Physical Values
Fastening torque ( at manufacturing) 30 Nm
 
Capacity
Nominal value 220 Liters
 
Weight
Total 9/10/11 kg
+ 0.5 kg / - 0.5 kg
Cap / Bung with gasket 0.034 kg
 

Materials
Container HDPE, Blue
Bung HDPE, White
Bung gasket Rubber, White
Sealing cap HDPE, Red

Type of Quality Test Requirement
Drop test Drop from the hight of 1.8m with no sign of visible leakage observed
Compression test Must be more than the force of 1900kgf/cm2 that pressed from top

UN-Marking
UN 1H1/ X1.6/ 250 /**/ SGP / YHC-***


200L-A POP UP




Tital 200 LAC
Material HDPE
Capacity 200L
Weight 10.5kg ± 0.5kg



Intermediate Bulk Packaging
TechPack
Bulk Packaging
Medium Packaging
Small Packaging
Open Top Drums
Total Packaging Solution

 
© Copyright 2012, Yung Hsin Contain Industry Co., Ltd.